Cart

Lay the mat on the shelf.

Position the extra shelf on the shelf and adjust to the required angle – no tools required.

Position the extra shelf on the Liro shelf – no tools required.

Insert the position angle into the mat, place them both in the drawer, then put Oeko Universal into position.

Insert the divider panel into the mat, place them both in the drawer, then put Oeko Universal into position.

Insert the position angle into the mat, place them both in the drawer, then put Oeko Universal into position.

Insert the position angle into the mat, place them both in the drawer, then put Oeko Universal into position.

Insert the divider panel into the mat, place them both in the drawer, then put Oeko Universal into position.

Tap the front with your finger and the pull-out glides right out.

Tap the front with your finger to open it slightly and then pull the mechanism right out of the unit.

Tap the front with your finger and the pull-out glides right out. Tap again and it glides all the way back in.

Tap the front with your finger and the pull-out glides right out. Tap again and it glides all the way back in.

The front opens fully when tapped with a finger.

Fit the caps over the mechanism once it has been installed and adjusted.

Fit the caps over the mechanism once it has been installed and adjusted.

Fit the caps over the mechanism once it has been installed and adjusted.

Fit the caps over the mechanism once it has been installed and adjusted.

Clip the hook into the slot – no tools required.

Press down the pedal with your foot and the waste system glides out.

Hangers clip onto the rail without the need for tools.

Punching template for drilling the holes to install Click Stop

Attach the drilling jig to the pin and drill.

For gluing glass shelves to the shelf supports.

The adapter connects the door shelves to the front panel in units with framed fronts.

Place the bracket over the tubular frame and screw to the front panel.

Extra hooks can be clipped onto the extended, height-adjustable tubular frames without the need for tools.

Spacer piece for Click Stop when used with a spacer

Axle tube for LeMans II Highboard supports four shelves

Clamp the revolving shelf support to the axle tube at the required height and attach the clip-on shelf.

Limits the opening angle of a wall unit front to 90°.

Limits the opening angle of a wall unit front to 90°.

Drill the spacer into position between the unit and the runner.

To cover cables from the side in the cable duct of the Pecasa standard wall profile.

Push on the front panel and it will open just enough to allow a comfortable grip.

Screw the case to the inside of the unit wall and insert Push-to-open.

Push on the front panel and it will open just enough to allow a comfortable grip. Then simply pull the mechanism right out of the unit.

Push on the front panel and it will open just enough to allow a comfortable grip.

Mount on the unit in addition to the magnetic push-out mechanism.

Softclose guides the front panel for the final part of the closing movement.

Softclose guides the front panel for the final part of the closing movement.

Softclose guides the front panel for the final part of the closing movement.