Cart

Lay the mat on the shelf.

Insert the position angle into the mat, place them both in the drawer, then put Oeko Universal into position.

Insert the divider panel into the mat, place them both in the drawer, then put Oeko Universal into position.

Insert the position angle into the mat, place them both in the drawer, then put Oeko Universal into position.

Insert the position angle into the mat, place them both in the drawer, then put Oeko Universal into position.

Insert the divider panel into the mat, place them both in the drawer, then put Oeko Universal into position.

Tap the front with your finger and the pull-out glides right out.

Tap the front with your finger to open it slightly and then pull the mechanism right out of the unit.

Tap the front with your finger and the pull-out glides right out. Tap again and it glides all the way back in.

Tap the front with your finger and the pull-out glides right out. Tap again and it glides all the way back in.

The front opens fully when tapped with a finger.

Attach the drilling jig to the pin and drill.

Extra hooks can be clipped onto the extended, height-adjustable tubular frames without the need for tools.

Clamp the revolving shelf support to the axle tube at the required height and attach the clip-on shelf.

Limits the opening angle of a wall unit front to 90°.

Limits the opening angle of a wall unit front to 90°.

To cover cables from the side in the cable duct of the Pecasa standard wall profile.

Push on the front panel and it will open just enough to allow a comfortable grip.

Screw the case to the inside of the unit wall and insert Push-to-open.

Push on the front panel and it will open just enough to allow a comfortable grip.

Mount on the unit in addition to the magnetic push-out mechanism.

Softclose guides the front panel for the final part of the closing movement.

Softclose guides the front panel for the final part of the closing movement.

Softclose guides the front panel for the final part of the closing movement.

Use one carton with two cardboard inserts.

Use two inserts in one carton.

Attach the divider to the shelf rail – no tools required.

Position the dividers on the base or wall of a metal shelf as required.