Cart

Position the extra shelf on the shelf and adjust to the required angle – no tools required.

Position the extra shelf on the Liro shelf – no tools required.

E-Touch EU power cable for FREE flap systems

Fit the caps over the mechanism once it has been installed and adjusted.

Fit the caps over the mechanism once it has been installed and adjusted.

Fit the caps over the mechanism once it has been installed and adjusted.

Fit the caps over the mechanism once it has been installed and adjusted.

Clip the hook into the slot – no tools required.

Press down the pedal with your foot and the waste system glides out.

Hangers clip onto the rail without the need for tools.

Punching template for drilling the holes to install Click Stop

For gluing glass shelves to the shelf supports.

The adapter connects the door shelves to the front panel in units with framed fronts.

Place the bracket over the tubular frame and screw to the front panel.

Extra hooks can be clipped onto the extended, height-adjustable tubular frames without the need for tools.

The reinforcement brackets are required for a front height of 160 mm or more.

Spacer piece for Click Stop when used with a spacer

Axle tube for LeMans II Highboard supports four shelves

Drill the spacer into position between the unit and the runner.

To cover cables from the side in the cable duct of the Pecasa standard wall profile.

Push on the front panel and it will open just enough to allow a comfortable grip.

Push on the front panel and it will open just enough to allow a comfortable grip.

Tipmatic opens the front panel just get enough to allow a comfortable grip, while Softclose guides it for the final part of the closing movement.

The full-extension runner guides the system / shelf right out of the unit.

The full-extension runner guides the system / shelf right out of the unit.

The full-extension runner guides the system / shelf right out of the unit.

Softclose guides the front panel for the final part of the closing movement.

Attach the divider to the shelf rail – no tools required.

Attach the divider to the shelf rail – no tools required.

Position the dividers on the base or wall of a metal shelf as required.

Position the extra shelf on the shelf and adjust to the required angle – no tools required.

Additional platform for large water appliances or a combination of water appliances.

Alternative axle tube for LeMans II for units with 720-900 mm interior height.