0 0
Note: For the proper functioning of this online shop JavaScript is required!
Fit the caps over the mechanism once it has been installed and adjusted.
Clip the hook into the slot – no tools required.
Press down the pedal with your foot and the waste system glides out.
Punching template for drilling the holes to install Click Stop
For gluing glass shelves to the shelf supports.
The adapter connects the door shelves to the front panel in units with framed fronts.
Place the bracket over the tubular frame and screw to the front panel.
Extra hooks can be clipped onto the extended, height-adjustable tubular frames without the need for tools.
Spacer piece for Click Stop when used with a spacer
Axle tube for LeMans II Highboard supports four shelves
Drill the spacer into position between the unit and the runner.
To cover cables from the side in the cable duct of the Pecasa standard wall profile.
Push on the front panel and it will open just enough to allow a comfortable grip. Then simply pull the mechanism right out of the unit.
Tipmatic opens the front panel just get enough to allow a comfortable grip, while Softclose guides it for the final part of the closing movement.
Softclose guides the front panel for the final part of the closing movement.
Position the dividers on the base or wall of a metal shelf as required.
Position the extra shelf on the shelf and adjust to the required angle – no tools required.
Clips on the bottom of the Compact Hochschrank Standard full-extension runner
Clips onto the top of the front of the peka shelf (Libell, Fioro, Liro)
Clips onto the bottom of the front of the peka shelf (Libell, Fioro, Liro)
Clips onto the back of the peka shelf (Libell, Fioro, Liro)
Clips onto the tubular frame of the Hochschrank Standard larder pull-out (depth: 530 mm)
The coupling rod connects the tubular frame to the door adapter.