0 0
Note: For the proper functioning of this online shop JavaScript is required!
Fit the caps over the mechanism once it has been installed and adjusted.
Clip the hook into the slot – no tools required.
Press down the pedal with your foot and the waste system glides out.
Hangers clip onto the rail without the need for tools.
Punching template for drilling the holes to install Click Stop
Attach the drilling jig to the pin and drill.
For gluing glass shelves to the shelf supports.
The adapter connects the door shelves to the front panel in units with framed fronts.
Place the bracket over the tubular frame and screw to the front panel.
Extra hooks can be clipped onto the extended, height-adjustable tubular frames without the need for tools.
Spacer piece for Click Stop when used with a spacer
Axle tube for LeMans II Highboard supports four shelves
Clamp the revolving shelf support to the axle tube at the required height and attach the clip-on shelf.
Limits the opening angle of a wall unit front to 90°.
Drill the spacer into position between the unit and the runner.
To cover cables from the side in the cable duct of the Pecasa standard wall profile.
Push on the front panel and it will open just enough to allow a comfortable grip.
Screw the case to the inside of the unit wall and insert Push-to-open.
Push on the front panel and it will open just enough to allow a comfortable grip. Then simply pull the mechanism right out of the unit.
Tipmatic opens the front panel just get enough to allow a comfortable grip, while Softclose guides it for the final part of the closing movement.
Mount on the unit in addition to the magnetic push-out mechanism.
Softclose guides the front panel for the final part of the closing movement.
Use one carton with two cardboard inserts.
Use two inserts in one carton.
Attach the divider to the shelf rail – no tools required.
Position the dividers on the base or wall of a metal shelf as required.
Oeko Complet Aqua S allows a boiling water system as well as conventional water filters to be fitted to the side in 550 mm wide elements.
Position the extra shelf on the shelf and adjust to the required angle – no tools required.
Clips on the bottom of the Compact Hochschrank Standard full-extension runner