Tap the front with your finger and the pull-out glides right out.
How long is the power cable E-Touch?
Approx. 1.8 m long
Does the E-Touch also work without Softclose?
No, can cause malfunctions.
Can the E-Touch be used with the Hochschrank Standard with a unit width of 275 mm?
No, only from an element width of 300 mm.
Is it possible to connect several E-Touch motors to a single button?
No, the button only has capacity for one code.
Why does the E-Touch switch work only partially?
Please check if the battery is inserted as far as it will go.
Can the E-Touch switch be mounted on the left and right?
Yes
Is it necessary for the screws on the E-Touch to go through the tubular frame into the front?
Yes
Is it possible to connect several E-Touch switches to one motor?
Yes
Are rubber or spring buffers required on the front panel for the E-Touch?
Yes, but not at the height of the switch.
Can the battery in the E-Touch switch be replaced?
Yes, see assembly instructions for details.
Is it possible to reset the E-Touch button?
Yes, see assembly instructions for details.
Can the E-Touch be used with the Hochschrank Box?
No
The motor does not beep or flash when the E-Touch switch is pressed.
The button must be re-learnt. Further information can be found on this support page. https://support.kesseboehmer.world/en/kitchen-fittings/features/etouch/dispensa_vvsx-2/
No LED lamp flashes on the E-Touch motor.
The button must be re-learnt. Further information can be found on this support page. https://support.kesseboehmer.world/en/kitchen-fittings/features/etouch/dispensa_vvsx-2/