The corner pull-out supports the clip-on shelves and guides them out of the unit.
When the Magic Corner Comfort corner pull-out is coming out, the pull-out shelves on the back hang downwards.
Please check the mounting screws on the shelves.
When the Magic Corner Comfort corner pull-out is coming out, the back-wall frame makes a noise.
Please clean the running surfaces and castors on the back-wall frame.
When the Magic Corner Comfort corner pull-out is coming out, the swivel section hangs out.
Please engage the bearing pin at the top correctly downwards.
The Magic Corner Comfort corner pull-out squeals when pulled out.
Please remove the dirt particles from the pivot bearing.
Compared to the upper part, the Magic Corner Comfort swivel frame is not fully extended at the bottom.
Pull out the guide completely and check that it runs smoothly.
Is it possible to plan a front-mounted piece of furniture and/or a front-mounted visible side with Magic Corner Comfort?
The Magic Corner Comfort has an overlap of 52 mm, which takes into account the thickness of the front and the depth of the handle. See assembly instructions for details.
When mounting the Magic Corner Comfort rear wall frame, the crossbars are missing.
These are included with the clip-on shelf sets.
Which corner pull-out has the best space utilisation?
Magic Corner Comfort
The self-closing mechanism of the Magic Corner Comfort is not properly activated when the corner pull-out is pulled out (it returns to the initial position).
Check that nothing is bent on the upper guide. Then activate the self-closing mechanism by retracting the pull-out completely.
Is it possible to retrofit a Magic Corner Comfort, Magic Corner Standard or LeMans II in an existing corner unit?
Yes, please contact our customer service.